Daikin Dry Mode Operation. [COOL] To lower the temperature in the room [DRY] To reduce
[COOL] To lower the temperature in the room [DRY] To reduce the humidity in the MODE MODE button • Press the MODE button to select Auto, Cool, Dry, Fan, or Heat modes. Check the display to see in which mode the control is set. Outdoor Unit The operation mode Improper installation or attachment of equipment or accessories could result in electric shock, short-circuit, leaks, fire or other damage to the equipment. Push once again to stop it. Cooling unit: COOL, DRY, FAN. 2 Auf der Benutzerschnittstelle auf den EIN/AUS-Schalter drücken. Here is a list of all operation modes and other modes that are Operation mode Press the MODE button to select the type of operating mode. Betrieb auf. And call your dealer for instructions. the OPERATING INSTRUCTION 1. While the power is on the default mode is Auto. Operation mode Press the MODE button to select the type of operating mode. This switch is useful when the remote controller is missing. e. Do not place objects around the indoor unit. Consult your dealer for assistance. Carefully read this operation manual before using the air conditioner. Ergebnis: Die Betriebsleuchte erlischt, und das System stellt den Betrieb ein. warten Sie noch mindestens 5 Minuten. Sehen Sie auf dem Display nach, in In Automatic, the temperature setting and operation mode (DRY, Cooling or Heating) are automatically selected according to the room temperature and outdoor temperature at the time Lorsque l’unité fonctionne en mode de refroidissement, la température réglée augmente de 0,9°F (0,5°C) au bout de la première demi-heure, d’encore 0,9°F (0,5°C) au bout de la deuxième When AUTO RUN mode is selected the temperature setting does not show on the LCD. The appliance must be stored in a room without continuously operating ignition sources (for example: open fl ames, an operating gas appliance or an operating electric heater). For cooling only unit, the available modes are: COOL ( For heat pump unit, the available modes are: AUTO ( ), Push this switch once to start operation. In Auto mode, the temperature is not There are 5 basic operation modes in Daikin air conditioner which are AUTO, COOL, DRY, FAN and HEAT. ) Indoor Unit ON/OFF switch: Push this switch once to start operation. If the display shows the icon, heat or cool mode will not be available for selection. If the air conditioner is not operating correctly, i. not generating cool or warm air, refrigerant leakage could be the cause. In order to In order to avoid electric shock, fi re or injury, if you detect any abnormality such as smell of fi re, stop the operation and turn off the breaker. Doing so may have an adverse influence on the performance, product quality, and life of the air conditioner. 3 Auf der Benutzerschnittstelle erneut auf den EIN/AUS-Schalter drücken. Ensure optimal AC use with Operation manual Daikin room air conditioner Operation manual Daikin room air conditioner English OPERATION SELECTION MODE Press the mode button to select the type of operation mode. werden. In order to avoid electric shock, fire or injury, if you detect any abnormally such as smell of fire, stop the operation and turn off the breaker. Sehen Sie auf dem Display nach, in . Die MODE-Taste betätigen, um den Betrieb von COOL (KÜHL), HEAT* (WARM), AUTO* (AUTO), DRY* (TROCKEN) oder FAN (GEBLÄSE) umzuschalten. It will tell you how to use the unit properly and help you if any trouble The air conditioner operates with the operation mode of your choice. This appliance is not intended to Operation lamp (green) TIMER lamp (yellow): (page 19. Heat pump unit: AUTO, COOL, DRY, FAN, HEAT. Only use accessories, optional Decode symbols on your Daikin controller, from operation modes like "Cool" and "Heat" to alerts like "Time to clean filter". Thank you for purchasing this Daikin air conditioner. The operation mode refers to the following table. 1 MODE Button Press the MODE button to switch operation from COOL, HEAT*, AUTO*, DRY*, FAN. Luftfeuchtigkeit im If the air conditioner is operated in cooling or dry mode with the flaps kept stopped in the down-ward direction, the flaps will automatically start operating in approximately an hour in order to In this operation mode, the system only operates with the AC unit in dry mode, refreshing the environment and prioritizing the operation to reduce humidity, when any of the zones is Ever noticed the *droplet icon* on your Daikin AC remote and wondered what it does? That’s **Dry Mode**, and in this video, I’ll explain how it works, when to use it, and how it can help you Programm Für Trocknungsbetrieb (Dry) Verwenden; Über Das Programm Für Trocknungsbetrieb (Dry); Programm Für Trocknungsbetrieb Verwenden (Ohne Remote-Umschalter Die MODE-Taste betätigen, um den Betrieb von COOL (KÜHL), HEAT* (WARM), AUTO* (AUTO), DRY* (TROCKEN) oder FAN (GEBLÄSE) umzuschalten. The unit automatically selects a suitable operation mode and adjusts to create a comfortable ambient Operation mode selector button Press to select operation mode (Cool/Heat/Fan/Auto/Dry). For cooling only unit, the available modes are: COOL ( ), DRY ( Dry mode simply works by sucking out the moisture of the air (humidity) so that the air becomes bearable and comfortable; i.